Mecalac
-
Benford MixersJ28Z Bevel Pinion
£119.66 Add to basketJ28Z bevel pinion. Confirm the component and required assembly with the parts team.
-
Benford RollersJ3 Wheel (MBR71) for Mecalac MBR71
£71.87 Add to basketJ3 wheel for MBR71 rollers, at the specified rear support-wheel assembly. Match the full part reference and machine version before ordering.
-
Benford DumpersJ31Z Circlip
£0.26 Add to basketJ31Z circlip. For component retention; check the retainer type and size.
-
Benford MixersJ58Z Shim Washer 1.6mm
£4.50 Add to basketJ58Z Shim washer with a thickness of 1.6 mm. Check the full part reference and machine version before ordering.
-
Benford MixersJ5Z Bush for Mecalac 1-71
£1.16 Add to basketJ5Z bush for 1-71 and MBR71 rollers, at the specified brake lever and steering-arm clutch linkage. Match the full part reference and machine version before ordering.
-
Benford DumpersK70 Handbrake Cable (1230mm Long) for Benford/Terex TT2000 dumper
£63.47 Add to basketK70 handbrake cable (1230 mm long). Match the cable length, end fittings and routing.
-
Benford MixersK74Z Oil Lip Seal
£6.41 Add to basketK74Z oil lip seal. Match the original reference, shaft and housing sizes, and sealing arrangement.
-
Mecalac DumpersL311FF02 Fuel-Injector Nozzle Sealing Washer
POA Read moreL311FF02 fuel-injector nozzle sealing washer for the specified engine fuel-injector nozzle on Terex TLB840PS Tier 4 Interim backhoe loaders. Match the complete part reference and machine configuration before ordering.
-
FiltersLF3805 Oil Filter (Cummins) for Mecalac PT9000
£18.50 Add to basketLF3805 engine oil filter with a published height of 138.23 mm. Match the filter reference and the requirements in your engine service manual before ordering.
-
Benford RollersM1000006 Throttle Lever Assembly
£288.03 Add to basketM1000006 throttle lever assembly. Match the control position and connections to the original.
-
Mecalac DumpersM1000023 Striker Bolt Nut
£31.97 Add to basketM1000023 striker bolt nut. Match the thread, length and fixing specification before ordering.
-
Benford RollersM1000045 Parking Brake Switch Decal for Mecalac MBR71 HD
£2.35 Add to basketM1000045 parking brake switch decal. Match the marking and label position to your machine.
-
Benford DumpersM1000048 Parking Brake Switch
£20.00 Add to basketM1000048 parking brake switch for the Mecalac MBR71 HD pedestrian roller. Use the part reference and machine details to check the correct switch before ordering.
-
Mecalac DumpersM1000054 Gas Strut Door for Mecalac 6MDX
£53.00 Add to basketM1000054 gas strut door. Listed for 6MDX (2019-2020); 9MDX (2019-2020).
-
Mecalac DumpersM1000069 ECU Controller (see notes before ordering)
£797.73 Add to basketM1000069 ECU controller. Confirm the application and any programming requirements before ordering.
-
Mecalac DumpersM1000086 Module Bluetooth
£250.00 Add to basketM1000086 module bluetooth. Confirm the application and any programming requirements before ordering.
-
Benford DumpersM1000234 Bracket Front Light Pod Left Hand Side
£44.53 Add to basketM1000234 bracket front light pod left hand side. Check the mounting points and orientation against the original.
-
Benford DumpersM1000238 Bracket Front Light POD Right Hand Side
£44.24 Add to basketM1000238 bracket front light POD right hand side. Check the mounting points and orientation against the original.
-
Mecalac DumpersM1000249 Front Light Pod Left Hand Side
£78.64 Add to basketM1000249 front light pod left hand side. Check the mounting, electrical connection and stated lighting position.
-
Benford DumpersM1000250 Front Light Pod Right Hand Side
£78.64 Add to basketM1000250 front light pod right hand side. Check the mounting, electrical connection and stated lighting position.
-
Benford DumpersM1000262 Engine Mount for Mecalac TA6
£87.57 Add to basketM1000262 engine mount. Check the mounting points and orientation against the original.
-
Mecalac DumpersM1000322 Hose Cuff
£16.15 Add to basketM1000322 hose cuff. Match the routing, end fittings and service specification to the original.
-
Benford DumpersM1000358 Camera Cover Guard
£13.81 Add to basketM1000358 camera cover guard. Check the shape, mounting points and stated position.
-
Benford DumpersM1000440 Dash Harness (Stage V) for Mecalac TA6
£368.46 Add to basketM1000440 dash harness (stage V). Match the connections and cable routing to the original installation.